Display assembly and components (whole hinge-up, cable, antennas,
hinges, enclosure)
NOTE:
This section describes removing components that require you to completely remove the
display panel. For more information about removing display components that do not require that you
remove the assembly from the computer, see
Display assembly (panel, bezel, webcam, microphone)
on page 42
.
All display assemblies include WLAN antenna transceivers and cables. WWAN models include 2
WWAN antenna transceivers and cables.
For a complete list of individual display spare parts, see
Display components on page 25
.
Description
Spare part number
Display bezel
For use with models with a webcam
660276-001
For use with models without a webcam
660277-001
Display hinges
(includes left and right hinges, brackets, and covers)
647677-001
Display Cable Kit
For use in models with HD displays
646969-001
For use in models with HD+ displays
646970-001
WLAN antennas
Included in Cable Kit
Included in Display Panel Support Kit
646968-001
657831-001
WWAN antennas
Included in Cable Kit
Included in Display Panel Support Kit
646968-001
657831-001
Display enclosure
Enclosure
Included in Display Panel Support Kit
641202-001
657831-001
Display Panel Support Kit
(includes WLAN antennas, WWAN antennas, and display enclosure)
657831-001
For a list of display spare parts, see
Display components on page 25
.
Before removing the display assembly, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
Component replacement procedures
89
