6.
To replace the display bezel, remove the two rubber screw covers
(1)
and the two Phillips
PM2.5×5.0 screws
(2)
in the bottom corners of the display bezel.
7.
Flex the top
(1)
of the bezel, the inside edges of the left and right sides
(2)
, and then the bottom
(3)
of the bezel until it disengages from the display enclosure.
8.
Remove the display bezel
(4)
.
Display bezels are available using the following spare part numbers:
660276-001 for use in models with a webcam
660277-001 for use in models without a webcam
9.
To remove the display panel, remove the eight Phillips PM2.5×4.0 screws
(1)
that secure the
display panel to the brackets.
10.
Rotate the top of the panel upward
(2)
.
92
Chapter 4 Removal and replacement procedures
