HP ProBook 5320m - Notebook PC, User Manual

Page: 41 / 147

To change the dialing mode in your current modem location setting, follow these steps:
1. Select Start > Devices and Printers .
2. Right-click the device that represents your computer, and click Modem settings .
3. Click the Dialing Rules tab.
4. Select your modem location setting.
5. Click Edit .
6. Click either Tone or Pulse .
7. Click OK twice.
●
Check the telephone number you are dialing and the response of the remote modem .
Dial a telephone number, make sure there is a response from the remote modem, and then hang
up.
●
Set the modem to ignore dial tones .
If the modem receives a dial tone it does not recognize, it does not dial and displays a “No Dial
Tone” error message.
To set the modem to ignore all dial tones before dialing, follow these steps:
1. Select Start > Devices and Printers .
2. Right-click the device that represents your computer, and click Modem settings .
3. Click the Modems tab.
4. Click the listing for the modem.
5. Click Properties .
6. Click Modem .
7. Clear the check box for Wait for dial tone before dialing .
8. Click OK twice.
Using the modem 29