manualshive.com logo in svg

HP ProBook 5320m - Notebook PC, User Manual

Share
Download
HP ProBook 5320m - Notebook PC User Manual Download Page 133

Select

To do this

Built-In Device Options

●

Enable/disable the wireless button state (enabled by
default).

●

Enable/disable the embedded WLAN device (enabled by
default).

●

Enable/disable embedded WWAN device radio (select
models only; enabled by default).

●

Enable/disable embedded Bluetooth® device radio
(enabled by default).

●

Enable/disable the Network Interface Controller (LAN)
(enabled by default).

●

Enable/disable LAN/WLAN switching (disabled by
default).

●

Set the wake on LAN state. Options include the
following:

◦

Disabled

◦

Boot to Network (set by default)

◦

Follow Boot Order

●

Enable/disable the fingerprint device (enabled by
default).

●

Enable/disable a modem device (enabled by default).

●

Enable the ambient light sensor (enabled by default).

●

Enable/disable the Notebook Multibay device (enabled by
default).

●

Enable/disable the integrated camera (select models only;
enabled by default).

●

Enable/disable the power monitor circuit (enabled by
default).

●

Enable/disable the audio device (enabled by default).

●

Enable/disable optical disc drive (enabled by default).

●

Enable/disable internal microphone (enabled by default).

●

Enable/disable the internal speakers (enabled by default).

Port Options (all are enabled by default)

NOTE:

All port options are enabled by default.

●

Enable/disable the Smart Card slot.

●

Enable/disable the flash media reader.

●

Enable/disable the USB port.

CAUTION:

Disabling the USB port also disables

MultiBay devices on the advanced port replicator.

●

Enable/disable the 1394 port.

●

Enable/disable the eSATA port.

Computer Setup menus 121

Summary of Contents for ProBook 5320m - Notebook PC




















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands