●
Thermal paste is used on the processor
(1)
and the heat sink section
(2)
that services it
NOTE:
The following illustration shows the replacement thermal material locations on a computer
model equipped with an Intel processor and a graphics subsystem with discrete memory.
●
Thermal paste is used on the processor
(1)
and the heat sink section
(2)
that services it
●
Thermal paste is used on the graphics subsystem chip
(3)
and the heat sink section
(4)
that
services it
NOTE:
The following illustration shows the replacement thermal material locations on a computer
model equipped with an Intel processor and a graphics subsystem with UMA memory.
Component replacement procedures
93
Summary of Contents for ProBook 455
