background image

4.

Remove the RJ-11 jack from the clip built into the base enclosure 

(3)

.

Reverse this procedure to install the RJ-11 jack cable.

System board

NOTE:

All system board spare part kits include replacement thermal material.

Description

Spare part number

System board for use in models with 1-GB of discrete memory

654306-001

System board for use in models with 512-MB of discrete memory

654307-001

System board for use in models with UMA graphics with WWAN

654309-001

System board for use in models with UMA graphics without WWAN

654308-001

Before removing the system board, follow these steps:

1.

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.

2.

Disconnect all external devices connected to the computer.

3.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.

4.

Remove the battery (see 

Battery on page 41

).

5.

Remove the following components:

a.

Bottom door (see 

Bottom door on page 43

).

b.

Hard drive (see 

Hard drive on page 46

)

76

Chapter 4   Removal and replacement procedures

Summary of Contents for ProBook 4535s










































































































































Reviews: