manualshive.com logo in svg

HP ProBook 450 G2, Maintenance And Service Manual, Page: 102 / 169

Share
Download
HP ProBook 450 G2 Maintenance And Service Manual Download Page 102

7.

Remove the 5 Phillips PM2.5×4.0 screws (1) from the display hinges.

8.

Lift the display assembly straight up and remove it (2).

CAUTION:

When installing the display assembly, be sure that the wireless antenna cables are routed 

and arranged properly.

Failure to properly route the antennas can result in degradation of the computer's wireless performance.

9.

If you need to remove the display bezel, remove the 2 mylar screw covers (1) and the 2 Phillips 
PM2.0×3.0 screws (2) in the bottom corners of the display bezel.

10.

Flex the top (3) of the bezel, the inside edges of the left and right sides (4), and then the bottom (5) of 
the bezel until it disengages from the display enclosure.

NOTE:

Make sure the hinges are not bent (see hinge position in following image) when you remove the 

bezel.

90

Chapter 6   Removal and replacement procedures for Authorized Service Provider parts

Summary of Contents for ProBook 450 G2










































































































































































Reviews:

No comments