manualshive.com logo in svg

HP ProBook 440 G3, Maintenance And Service Manual, Page: 39 / 144

Share
Download
HP ProBook 440 G3 Maintenance And Service Manual Download Page 39

4

Removal and replacement procedures 
preliminary requirements

Tools required

You will need the following tools to complete the removal and replacement procedures:

●

Flat-bladed screwdriver

●

Phillips P0 and P1 screwdrivers

●

Torx T8 screwdriver

Service considerations

The following sections include some of the considerations that you must keep in mind during disassembly 
and assembly procedures.

NOTE:

As you remove each subassembly from the computer, place the subassembly (and all accompanying 

screws) away from the work area to prevent damage.

Plastic parts

CAUTION:

Using excessive force during disassembly and reassembly can damage plastic parts. Use care 

when handling the plastic parts. Apply pressure only at the points designated in the maintenance 
instructions.

Tools required

27

Summary of Contents for ProBook 440 G3

















































































































































Reviews:

No comments