manualshive.com logo in svg

HP ProBook 4340s, User Manual

Share
Download
HP ProBook 4340s User Manual Download Page 29

Bottom 

Component

Description

(1)

Battery and service door release
latches

●

Releases the battery from the battery bay by
sliding the release latches one time.

●

When the battery has been removed from the
battery bay, releases the service door from
the computer by sliding the release latches a
second time.

(2)

 

Battery bay

Contains the battery.

(3)

Service door

Protects the hard drive bay, the wireless LAN
(WLAN) module slot, and the memory module
slots.

CAUTION:

To prevent an unresponsive system,

replace the wireless module only with a wireless
module authorized for use in the computer by the
governmental agency that regulates wireless
devices in your country or region. If you replace the
module and then receive a warning message,
remove the module to restore computer
functionality, and then contact technical support
through Help and Support.

(4)

 

Vents (2)

Enable airflow to cool internal components.

NOTE:

The computer fan starts up automatically

to cool internal components and prevent
overheating. It is normal for the internal fan to cycle
on and off during routine operation.

Bottom

19

Summary of Contents for ProBook 4340s















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands