Fixing Problems 14
5.
On a networked computer, open an internet browser, enter the projector’s
IP address in the URL bar, and press the
Enter
key.
■
If the projector information page appears, the network connection is
working.
■
If the projector information page does not appear, network
communication is bad. Check the LAN cable. Check the network with
a different device. Connect the module to a different LAN outlet. For
further assistance, see the
Administrator's Guide
.
If you are not able to fix the problem using these steps and the
Administrator’s
Guide
, contact HP for assistance. See the support guide on the documentation
CD or go to
www.hp.com/support
.
Indicator Lights
The indicator lights on the server module provide important information about
the module’s status.
Power/Status Light
Off
Not receiving power.
●
Check the power module and power source.
On steady (green)
On and ready, but no network communication.
●
Check the LAN 10/100 lights.
Flickering irregularly
(green)
Normal: on and receiving network communication.
Blinking (green)
Module is starting up (up to 15 seconds after applying
power), or no network connection is detected.
●
Check the LAN 10/100 lights.
Blinking (orange)
Problem detected during startup.
●
Unplug, then reconnect power. If the condition
persists, contact HP.
LAN 10/100 Lights
Both off
No network connection.
●
Check the LAN cable. Check the network with a
different device. Connect the module to a different
LAN outlet.
●
See the
Administrator’s Guide
.
On steady (green)
Normal: USB is ready.
