11
3
Managing HP Projectors
Configuring the Module and Projector
You can use the server module to configure and monitor the projector from a
remote location on the network. Using your computer, you can perform tasks
such as these:
●
Configure the server module’s network settings.
●
Receive email notifications when certain conditions or events occur on
the projector.
●
Set security options to require passwords, encrypt data, and control access.
●
Upgrade the firmware on the projector and server module.
For complete information about managing projectors, see the
Administrator’s
Guide
on the Documentation CD.
Using a Web Browser
Each projector server module contains an embedded Web server, which acts
as a Web site from which you can remotely configure various settings on the
the server module and projector and check their status.
1.
On the projector, open the on-screen menu, go to the
Help
menu, and note
the IP address shown on the main menu screen. The address consists of
four numbers separated by dots, such as
10.2.3.4
.
2.
On a networked computer, open an internet browser, enter the IP address
of the projector in the URL bar (for example, type
10.2.3.4
or
http://10.2.3.4
), and press the
Enter
key.
