HP Photosmart 318, User Manual

Page: 52 / 88

HP photosmart 318 User Guide 44
Installing a CF memory card
Use only CompactFlash Association (CFA)
certified type 1 CF memory cards with your
digital camera. These cards are manufactured
by several vendors and are available in a variety
of memory sizes. You can purchase additional
CF memory cards from www.hpshopping.com
(selected countries only), or from your local digital camera or
electronics store.
To install a CF memory card
1 Make sure the camera is turned off.
CAUTION
Inserting or removing a CF memory card while the
camera is on could damage the existing card or result
in lost images.
2 Open the CF memory card door.
3 If there is a card already in the camera,
remove the existing card. To do this, locate
the lever on the bottom of the camera under
the CF memory card door. Slide it toward the
center of the camera. The card pops out.
4 Hold the new CF memory card so that the
tiny ledge on the top rear of the card is
between your fingers, the side with pinholes faces the camera,
and the ledge on the back of the card faces the front of the
camera.
5 Insert the card firmly all the way into the camera.
CAUTION
The card should fit easily almost all the way into the
slot. If it stops when it is only partially inserted, turn the
card over and try again. Do not force the card into the
camera.
SJUG.book Page 44 Tuesday, October 9, 2001 1:35 PM