manualshive.com logo in svg

HP Pavilion TouchSmart 15 Sleekbook, Maintenance And Service Manual, Page: 92 / 126

Share
Download
HP Pavilion TouchSmart 15 Sleekbook Maintenance And Service Manual Download Page 92

10.

Remove the WLAN (see 

WLAN module on page 60

).

11.

Remove the system board (see 

System board on page 63

).

Remove the display assembly.

CAUTION:

Support the display assembly when removing the following screws. Failure to support

the display assembly can result in damage to the display assembly and other computer components.

▲

Remove the four Phillips screws from the display hinges 

(1)

 and lift the display assembly 

(2)

.

Reverse this procedure to reinstall the display assembly.

For instructions on removing the display assembly components for a TouchSmart Display, continue to

the next section.

Display assembly components

Description

Spare part number

Antenna Kit

 (includes left and right wireless antenna cables and transceivers)

701676-001

Display Panel Cable Kit

 (includes display panel cable and webcam/microphone module cable) 

701681-001

Display back cover enclosure:

 

84

Chapter 4   Removal and replacement procedures

Summary of Contents for Pavilion TouchSmart 15 Sleekbook































































































































Reviews:

No comments