manualshive.com logo in svg

HP Pavilion TouchSmart 15 Sleekbook, Maintenance And Service Manual, Page: 22 / 126

Share
Download
HP Pavilion TouchSmart 15 Sleekbook Maintenance And Service Manual Download Page 22

Lights

Component

Description

(1)

Power light

●

White: The computer is on.

●

Blinking white: The computer is in the Sleep state, which
is an energy-saving mode. The computer shuts off power
to the display and other unneeded components.

●

Off: The computer is off or in Hibernation. Hibernation
is an energy-saving mode that uses the least amount of
power.

(2)

Mute light

●

Amber: Computer sound is off.

●

Off: Computer sound is on.

(3)

Wireless light

●

White: An integrated wireless device, such as a wireless
local area network (WLAN) device and/or a
Bluetooth® device, is on.

●

Amber: All wireless devices are off.

(4)

 

Caps lock light

White: Caps lock is on, which switches the keys to all capital
letters.

(5)

 TouchPad 

light

●

Amber: The TouchPad is off.

●

Off: The TouchPad is on.

14

Chapter 2   External component identification

Summary of Contents for Pavilion TouchSmart 15 Sleekbook































































































































Reviews:

No comments