Remove the RJ-45 cover:
1.
Remove the Phillips M screw
(1)
for the RJ-45 cover.
2.
Lift the RJ-45 assembly
(2)
to remove it from the base enclosure.
Reverse these procedures to replace the RJ-45 assembly.
Display Assembly
Description
Spare part number
39.6 cm (15.0 in), high definition (HD), WLED, SVA BrightView TouchSmart slim display assembly
701688-001
Display bezel
701680-001
IMPORTANT:
Make special note of each screw and screw lock size and location during removal
and replacement.
Before removing the display assembly, follow these steps:
1.
Shut down the computer.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery on page 42
).
5.
Remove the display panel (see
Display panel on page 44
).
6.
Remove the keyboard (see
Keyboard on page 47
).
7.
Remove the top cover (see
Top cover on page 51
).
8.
Remove the hard drive (see
Hard drive on page 56
).
9.
Remove the USB board (see
USB board/Audio jack on page 59
).
Component replacement procedures
83