HP Pavilion HDX X16-1040 Maintenance And Service Manual Download Page 73

Page: 73 / 146

Removal and replacement procedures

4–38

28. If it is necessary to replace the display hinges, remove the two Phillips PM2.0×4.0 screws

that secure the

display hinge bracket to the display bezel.

29. Remove the display hinge bracket

30. Remove the four Phillips PM2.0×4.0 screws

that secure the display hinges to the display panel.

31. Remove the four Phillips PM2.5×7.0 screws

that secure the display hinges to the display panel.

32. Remove the display hinges

. The display hinges and display hinge bracket are included in the Display

Hinge Kit, spare part number 496463-001.

Reverse this procedure to reassemble and install the display assembly.

Summary of Contents for Pavilion HDX X16-1040



















































































































































Search results

Summary of Contents for Pavilion HDX X16-1040

Reviews:

Related manuals for Pavilion HDX X16-1040

Brands by name

Popular brands

HP Pavilion HDX X16-1040, Maintenance And Service Manual

Search results

Summary of Contents for Pavilion HDX X16-1040

Reviews:

Related manuals for Pavilion HDX X16-1040

Brands by name

Popular brands