HP Pavilion HDX X16-1040 Maintenance And Service Manual Download Page 70

Page: 70 / 146

Removal and replacement procedures

4–35

16. If it is necessary to replace the webcam/microphone module, remove the Phillips PM2.0×4.0 screw

that

secures the module to the display bezel.

17. Release the webcam/microphone module

as far from the display bezel as the webcam/microphone module

cable allows.

18. Disconnect the webcam/microphone module cable

from the webcam/microphone module, and remove the

webcam/microphone module. The webcam/microphone module is available using spare part number
496674-001.

19. If it is necessary to replace the display hinge cover, display inverter, display panel cable, or

webcam/microphone module cable, remove the four Phillips PM2.0×4.0 screws

that secure the display hinge

cover to the display bezel.

20. Remove the display hinge cover

from the display bezel. The display hinge cover is available using spare part

number 496464-001.

Summary of Contents for Pavilion HDX X16-1040



















































































































































Search results

Summary of Contents for Pavilion HDX X16-1040

Reviews:

Related manuals for Pavilion HDX X16-1040

Brands by name

Popular brands

HP Pavilion HDX X16-1040, Maintenance And Service Manual

Search results

Summary of Contents for Pavilion HDX X16-1040

Reviews:

Related manuals for Pavilion HDX X16-1040

Brands by name

Popular brands