HP Pavilion g4 Maintenance And Service Manual Download Page 102

Page: 102 / 132

10.

If it is necessary to replace the display panel cable:

Release the tabs

(1)

built into the display enclosure shielding that secure the display panel

cable to the display enclosure.

Release the display panel cable from the clips

(2)

built into the display enclosure.

Remove the display panel cable

(3)

. The display panel cable includes the webcam/

microphone module cable and is available in the Display Cable Kit, spare part number
639441-001.

11.

If it is necessary to replace the wireless antenna cables and transceivers:

Release the wireless antenna transceivers

(1)

from the display enclosure. (The wireless

antenna transceivers are attached to the display enclosure with double-sided tape.)

Release the wireless antenna cables from the clips

(2)

built into the display enclosure.

Remove the wireless antenna cables and transceivers

(3)

. The wireless antenna cables

and transceivers are available in the Antenna Kit, spare part number 640294-001.

Chapter 4 Removal and replacement procedures

Summary of Contents for Pavilion g4





































































































































Search results

Summary of Contents for Pavilion g4

Reviews:

Related manuals for Pavilion g4

Brands by name

Popular brands

HP Pavilion g4, Maintenance And Service Manual

Search results

Summary of Contents for Pavilion g4

Reviews:

Related manuals for Pavilion g4

Brands by name

Popular brands