manualshive.com logo in svg

HP Pavilion DV7-4060, User Manual, Page: 75 / 112

Share
Download
HP Pavilion DV7-4060 User Manual Download Page 75

8

External media cards

Using Digital Media Slot cards

Optional digital cards provide secure data storage and convenient data sharing. These cards are used
with digital media-equipped cameras and PDAs, as well as with other computers.

The Digital Media Slot supports the following digital card formats:

●

Memory Stick (MS)

●

Memory Stick Pro (MSP)

●

MultiMediaCard (MMC)

●

Secure Digital (SD) Memory Card

●

Secure Digital High Capacity (SDHC) Memory Card

●

xD-Picture Card (XD)

●

xD-Picture Card (XD) Type H

●

xD-Picture Card (XD) Type M

Inserting a digital card

CAUTION:

To avoid damaging the digital card or the computer, do not insert any adapter into the

Digital Media Slot.

CAUTION:

To prevent damage to the digital card connectors, use minimal force to insert a digital card.

1.

Hold the digital card label-side up, with the connectors facing the computer.

2.

Insert the card into the Digital Media Slot, and then push in on the card until it is firmly seated.

A sounds alerts you when a device is detected, and a menu of options appears.

Using Digital Media Slot cards

65

Summary of Contents for Pavilion DV7-4060

















































































































Reviews:

No comments