42
Network configuration
Transmit interval
The number of seconds between loop protection packets sent. The range is from 1 to 10
seconds and the the default is 3 seconds.
Shutdown time
The number of seconds the Ethernet interface is shut down when a loop is detected. The range
is from 0 to 604800 seconds and the default is 180 seconds. If you specify a value of 0, the
Ethernet interface is shut down indefinitely.
Viewing loop protection statistics
The following status and statistics for the loop protection feature are available on the
Status
>
Loop protection
page.
Loop protection status
Indicates whether the feature is enabled or disabled.
Number of packets sent/received
The number of loop protection packets sent and received since the last reboot.
Shut down interface
If the Ethernet interface is currently in the shut down state, eth0 appears in this field.
Remaining shutdown time
If the Ethernet port has been shut down due to the discovery of a loop, this field shows the
number of seconds it will remain shut down.
Loop detection count
The total number of loops detected since the HP 501 was last reset.
Time of last loop detection
The date and time of the most recent detected loop.
Summary of Contents for Pavilion 501
Page 19: ...Setting the system time 19 ...
