HP Pavilion 501, Configuration And Administration Manual

Page: 12 / 64

12 Managing the HP 501
Configuring a management access control list
You can create an access control list (ACL) that lists hosts that are authorized to access the HP
501 management tool. If this feature is disabled, anyone can access the management interface
from any network client by supplying the correct user name and password.
To enable the ACL feature:
1. Select
Management
>
Management ACL
to open the
Management access
control list configuration
page.
2. Under Management ACL control , select Enabled .
3. Under Allowed IPv4 addresses and Allowed IPv6 addresses , enter an IPv4
address or IPv6 address and click Add .
You can add up to five addresses to each list.
4. Click Save .
To remove an address from the Allowed addresses list, select it and click Remove .