Hard drive
NOTE:
The hard drive spare part kit does not include the hard drive rubber bracket, hard drive
connector cable, or screws. These components are included in the Hard Drive Hardware Kit, spare part
number 740706-001.
Description
Spare part number
1 TB, 5400 rpm, 9.5 mm
676521-005
750 GB, 5400 rpm, 9.5 mm
634250-005
500 GB, 5400 rpm, 7.0 mm
683802-005
mSATA solid-state drive, 24 GB (for use with select computer models with Intel processors, HM86
Express chipsets, and switchable discrete graphics)
732085-001
Before removing the hard drive, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
Battery on page 49
), and then remove the following components:
a.
Optical drive (see
Optical drive on page 55
)
b.
Keyboard (see
Keyboard on page 62
)
c.
Service door (see
Service door on page 50
)
d.
WLAN module (see
WLAN module on page 53
)
e.
Memory module (see
Memory module on page 51
)
f.
Top cover (see
Top cover on page 67
)
Component replacement procedures
71
