background image

29

Operation

• Never open the battery cover while the LED Lamp is flashing green. Doing so can 

result in the image you just shot being saved incorrectly, damage to other images 
stored in memory, malfunction of the camera, etc.

• If unwanted light is shining directly onto the lens, shade the lens with your hand 

when shooting an image.

Monitor Screen when Shooting Snapshots

• Subject brightness conditions can cause monitor screen response to slow and can 

cause digital noise in the monitor screen image.

• The image that appears on the monitor screen is for image composition. The actual 

image will be recorded at the quality set for the image quality setting (page 57).

Shooting Indoors under Fluorescent Lighting

• Minute flickering of fluorescent lighting can affect the brightness or color of an 

image.

• Any of the following can make proper focus impossible.

– Solid color wall or other very low contrast subject
– Strongly back lit subject
– Very shiny subject
– Blinds or other subject with a repeating horizontal pattern
– Multiple subjects at varying distances from the camera
– Subject in a dark location
– Camera movement while shooting
– Fast-moving subject
– Subjects outside the focus range of the camera

• If you cannot focus properly, try using multi focus (page 50) or Manual Focus (page 

49).

Snapshot Shooting Precautions

Auto Focus Restrictions

Summary of Contents for P650


















































































































Reviews: