HP P650 Page 17 User Manual Download

Page: 17 / 113

NOTE

• Even if you turn on the camera, the battery will continue to charge if there is a USB

connection with a computer. In this case, however, LED Lamp operation will
change as described below.

LED Lamp Operation

IMPORTANT!

• Charging is not performed while the connected computer is in the hibernate mode.
• When charging the camera by connecting it to a computer, you may need to replug

the USB cable if rebooting the computer.

• A charging error can occur immediately after charging begins or some time after

charging begins. A charging error is indicated by the LED Lamp flashing red.

Other Charging Precautions

• Never use any other type of charger device. Attempting to use a different charger

can result in unexpected accident.

• A battery that is still warm due to normal use may not charge fully. Give the battery

time to cool before charging it.

• A battery discharges slightly even when it is not loaded in the camera. Because of

this, it is recommended that you charge the battery immediately before you need to
use it.

• Charging the camera’s battery may cause interference with TV and radio reception.

If this happens, plug the charger into an outlet that is further away from the TV or
radio.

• Actual charging time depends on current battery capacity and charging conditions.
• Do not use the USB adapter with any other device.

Lamp Status

Description

Lit/Flashing Amber

Charging / Transfer files

Flashing Red

Abnormal ambient temperature, charging taking
abnormally long, or battery problem (page 98)

Lit Green

Charging complete

Summary of Contents for P650


















































































































Search results

Summary of Contents for P650

Reviews:

Related manuals for P650

Brands by name

Popular brands

HP P650, User Manual

Search results

Summary of Contents for P650

Reviews:

Related manuals for P650

Brands by name

Popular brands