HP NonStop RDF, Management Manual

Page: 357 / 478

RDFSCAN Commands Quick Reference
RDFSCAN runs under the Guardian user interface (normally the TACL command interpreter)
to the NonStop operating system. The RDFSCAN command starts an RDFSCAN session that
lets you enter RDFSCAN commands interactively, noninteractively, or through a command file.
Where issued: primary or backup system.
Security: Any user.
RDFSCAN [ file ]
AT
The AT command specifies the record in the RDF log file at which RDFSCAN begins the next
operation.
AT [record-number]
DISPLAY
The DISPLAY command enables or disables the display of line (record) numbers in subsequent
RDFSCAN output.
DISPLAY {ON | OFF}
EXIT
The EXIT command ends your current RDFSCAN session.
EXIT
FILE
The FILE command selects the RDF log file to which subsequent RDFSCAN commands apply.
FILE [\system.][$volume.][subvolume.]file
HELP
The HELP command displays the syntax of RDFSCAN commands or introductory information
about the RDFSCAN utility.
HELP [ ALL ]
[ INTRO ]
[ command ]
LIST
The LIST command displays a specified number of log messages that contain the current match
pattern.
LIST number
LOG
The LOG command selects a file to which subsequent LIST commands copy their output in
addition to the standard output device. When you issue the LOG command followed by a LIST
command, RDFSCAN continues to display the LIST records on the standard device and also
copies them to the file specified in the LOG command.
LOG [\system.][$volume.][subvolume.]file
MATCH
The MATCH command specifies a pattern to search for in the log file. RDFSCAN searches for
the specified character string without regard for uppercase or lowercase.
MATCH text
RDFSCAN Commands Quick Reference 357