262
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter interface view.
interface
interface-type interface-number
N/A
3.
Specify an inbound routing
additional metric.
ripng metricin
value
Optional.
0 by default.
4.
Specify an outbound
routing additional metric.
ripng metricout
value
Optional.
1 by default.
Configuring RIPng route summarization
Step Command
1.
Enter system view.
system-view
2.
Enter interface view.
interface
interface-type interface-number
3.
Advertise a summary IPv6
prefix.
ripng summary-address
ipv6-address prefix-length
Advertising a default route
With this feature enabled, a default route is advertised through the specified interface regardless of
whether the default route is available in the local IPv6 routing table.
To advertise a default route:
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter interface view.
interface
interface-type
interface-number
N/A
3.
Advertise a default route.
ripng default-route
{
only
|
originate
} [
cost
cost
]
Not advertised by default.
Configuring a RIPng route filtering policy
Reference a configured IPv6 ACL or prefix list to filter received or advertised routing information. You can
also filter outbound routes redistributed from a routing specific routing protocol.
To configure a RIPng route filtering policy:
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter RIPng view.
ripng
[
process-id
] [
vpn-instance
vpn-instance-name
]
N/A
3.
Configure a filter policy to
filter incoming routes.
filter-policy
{
acl6-number
|
ipv6-prefix
ipv6-prefix-name
}
import
By default, RIPng does not filter
incoming routing information.
