In
The MSM430, MSM460, and MSM466 are Wi-Fi Alliance
authorized Wi-Fi CERTIFIED 802.11n/a/b/g products. The Wi-Fi
CERTIFIED Logo is a certification mark of the Wi-Fi Alliance.
MSM430, MSM460, and MSM466 802.11n Access Points Quickstart
This Quickstart shows you how to install and get started using the MSM430, MSM460, and MSM466 Dual Radio 802.11n Access Points, hereafter referred to as
the AP except for when referencing a specific model. The latest HP documentation is available at www.hp.com/support/manuals.
Important:
Operating this AP in controlled mode requires HP MSM7xx software V5.5.2 or later.
Hardware overview
➀
➁
➅
➇ ➈
➆
➆
➆
➆
➃
➄
➃
➂
Front view
1: Status LEDs (left to right) Power, Ethernet, Radio 1, Radio 2
2: Cable lock hole
3: Retention screw hole
Back view
4: Antenna connectors (MSM466 only)
Radio 1 right, Radio 2 left
5: Reset button
6: Cable channel
7: AP Bracket tab slot
8: Console port
9: Ethernet port
Model
Part numbers
MSM430
J9651A (WW), J9650A (AM), J9652A (JP), J9653A (IL), J9654A (TAA)
MSM460
J9591A (WW), J9590A (AM), J9589A (JP), J9618A (IL), J9655A (TAA)
MSM466
J9622A (WW), J9621A (AM), J9620A (JP), J9619A (IL), J9656A (TAA)
WW=Worldwide, AM=The Americas, JP=Japan, IL=Israel, TAA=AM special.
