HP MSM313, Deployment Manual

Page: 43 / 78

HP MSM313/MSM323 Deployment Guide 41 2 Public/guest networks
B. Create a RADIUS profile
1.
Select
Security > RADIUS profiles
.
2.
Click
Add New Profile
.
•
In the
Profile name
box, assign
RADIUS1
to the new profile.
•
In the
Settings
box, use the defaults except for
Authentication method
which must match
the method supported by the RADIUS server.
•
In the
Primary RADIUS server
box, specify the address of the corporate RADIUS server
and the secret the service controller will use.
•
Click
Save
.
C. Configure the service controller to retrieve attributes from the
RADIUS server
1.
Select
Public access > Attributes
.
2.
Select the
Retrieve attributes using RADIUS
option.
3.
Select the
RADIUS profile
you defined (
RADIUS Profile 1
).
4.
Specify the
username
and
password
the service controller will use to login to the RADIUS
server.
5.
Click
Retrieve Now
. The service controller will login and retrieve the attributes.
6.
Click
Save
.
D. Create VLANs
1.
Select
Network > Ports.
2.
Under
VLAN configuration
, click
Add New VLAN
.
•
Under
General
•
Leave the
Port
selection as
LAN port
.
•
Set
VLAN ID
to
30
.
•
Set
VLAN name
to
Management
.
•
Under
Assign IP address via,
select
Static.
• Set IP address
to
192.168.30.1
.
•
Set
Mask
to
255.255.255.0
.
•
Leave
Gateway
blank.
•
Click
Save
.