HP MSM313/MSM323 Deployment Guide
28
2
Public/guest networks
Scenario 2c: Hotspot with satellites and roaming
(via RADIUS server)
This scenario adds multiple APs to extend the wireless network in Scenario 2b.
AP devices can be used to extend the reach of the public access network created by a service
controller.
How it works
This scenario creates two virtual service communities (VSCs) on each AP. Each VSC provides
support for a different security option: 802.1X (with WEP) or WPA.
To connect with the wireless network, users must select the SSID of the VSC that matches the
option that they want to use. Roaming is supported, since the same VSCs are defined on all
access points.
Authentication of client stations is done by the service controller using accounts defined on a
RADIUS server.
Configuration road map
Note:
Start with the configuration defined in Scenario 2b.
A.
Install the APs
Install the APs as described in the appropriate Quickstart guide.
B.
Switch the APs to autonomous mode
By default the APs are configured to operate in controlled mode. Switch them to autonomous mode
as follows:
1.
Start the management tool and login.
2.
On the home click
Switch to Autonomous Mode.
The AP will restart.
P
UBL
IC W
L A
N
1.4
1.5
1.6
1.7
Service
controller
LAN port
Internet port
192.168.1.0
1.2
1.3
Router
Firewall
RADIUS
server
LAN B
192.168.5.0
5.1
5.2
1.1
LAN A
Web
server
5.3
P
UBLIC WL A
N
P
UBLIC WL A
N
AP
AP
LAN
192.168.1.0
1.8
1.9
Management
tool
Summary of Contents for MSM313
