HP MSM313, Deployment Manual

Page: 37 / 78

HP MSM313/MSM323 Deployment Guide 35 2 Public/guest networks
Configuration road map
A. Define settings on the RADIUS servers
1.
On the ISP RADIUS server create accounts for public users.
2.
On the corporate RADIUS server create accounts for employees.
B. Install the service controller and AP
1.
Install the service controller and AP as described in the appropriate quickstart guides.
2.
Before you connect each unit to the LAN, start the
Management Tool
and configure each unit
as described in the sections that follow.
C. Switch the AP to autonomous mode
By default the AP is configured to operate in controlled mode. Switch it to autonomous mode as
follows:
1.
Start the
Management Tool
and login.
2.
On the home page click
Switch to Autonomous Mode.
The AP will restart.
Configure the service controller
A. Configure the Internet port
1.
Select
Network > Ports > Internet port.
2.
Select
No address (Support VLAN traffic only)
.
3.
Click
Save
.
B. Create two RADIUS profiles
1.
Select
Security > RADIUS profiles
.
2.
Click
Add New Profile
.
•
In the
Profile name
box, assign
CorporateRADIUS
to the new profile.
•
In the
Settings
box, use the defaults except for
Authentication method
which must match
the method supported by the RADIUS server.
•
In the
Primary RADIUS server
box, specify the address of the corporate RADIUS server
and the secret the service controller will use.
•
Click
Save
.
3.
Click
Add New Profile
.
•
In the
Profile name
box, assign
ISPRADIUS
to the new profile.
•
In the
Settings
box, use the defaults except for
Authentication method
which must match
the method supported by the RADIUS server.
•
In the
Primary RADIUS server
box, specify the address of the ISP RADIUS server and the
secret the service controller will use.
•
Click
Save
.