HP MR Gen10 Plus User Manual Download Page 7

Page: 7 / 179

HPE MR Gen10 Plus Controller

The HPE MR Gen10 Plus Controller is a family of tri-mode controllers ideal for maximizing performance while supporting advanced

RAID levels. This controller operates in Mixed Mode, which combines RAID and JBOD operations simultaneously.

This controller provides:

16 lanes across 2 x8 internal SlimSAS (SFF-8654) ports

16 Gbs NVMe, 12 Gbs SAS, 6 Gbs SATA

Mixed mode RAID and JBOD functionality simultaneously

UEFI and Legacy Boot modes

Support for Self-Encrypting Drive (SED)

Eight lane PCIe Gen4 host interface

Management tools:

MR Storage Administrator

IMPORTANT:

This controller is managed through the MR Storage Administrator. It cannot be managed using Smart Storage
Administrator or Intelligent Provisioning, or HPE OneView. MR controllers can be monitored by HPE OneView.

HPE StorCLI

UEFI Storage Configuration Utility

Redfish RESTful API

Figure 1:

Figure 1: HPE MR Gen10 Plus Controller

HPE MR Gen10 Plus Controller naming framework

naming framework

HPE MR Gen10 Plus Controller

Summary of Contents for MR Gen10 Plus




















































































































































































Search results

Summary of Contents for MR Gen10 Plus

Reviews:

HP MR Gen10 Plus, User Manual, Page: 7 / 179

Search results

Summary of Contents for MR Gen10 Plus

Reviews: