HP MR Gen10 Plus User Manual Download Page 154

Page: 154 / 179

Sanitizing an Unconfigured Good drive

Cryptographic erase is supported on SSDs, and some HDDs. To understand if your drive supports crypto erase, see QuickSpecs

QuickSpecs.

WARNING:

During a sanitize operation, any data on the drive is permanently lost.

Procedure

1. From the System Utilities screen, select System Configuration > HPE MRXXX Gen10+ > Main Menu > Drive Management.

2. In the Drive Management screen, select the JBOD drive that you want to convert to Unconfigured Good.

3. In the drive screen, select Make Unconfigured Good from the Operation drop-down menu. Click Go, and follow the instructions on

the screen to proceed.

4. Click Advanced and check the Cryptographic Erase Capable field shows Yes to make sure you can perform cryptographic erase on

the drive.

5. In the drive screen, select Cryptographic Erase from the Operation drop-down menu. Click Go, and follow the instructions on the

screen to proceed.

Sanitizing an Unconfigured Good drive

154

Summary of Contents for MR Gen10 Plus




















































































































































































Search results

Summary of Contents for MR Gen10 Plus

Reviews:

HP MR Gen10 Plus, User Manual, Page: 154 / 179

Search results

Summary of Contents for MR Gen10 Plus

Reviews: