Installing and Configuring
NOTE:
To leave the pop-up menu without entering a password, press the
Esc
key at any time.
5. Enter the password (new or old) in the appropriate field and press the
Enter
key.
The password is accepted and the next field just below it,
Re-enter new password: [ ]
or
Enter new password: [ ]
field is highlighted. For security reasons, the password does
not display on the screen.
6. If necessary, enter the new password in the
Enter new password: [ ]
field and press the
Enter
key.
NOTE:
Entering nothing or “blank” in the
Enter new password
field followed by entering nothing or
“blank” in the
Re-enter new password
field will turn off the password setting, changing it to
Not Set
. If
the Supervisor Password is changed to
Not Set
, the User password is forced to
Not Set
.
7. Enter the new password again in the
Re-enter new password: [ ]
field and press the
Enter
key.
After re-entering the new password and pressing the
Enter
key, the pop-up menu
disappears and the
Supervisor Password is
field changes to
Set
and on the next boot the
HP server will request a password to access the Setup Utility and complete the boot
process.
8. If you only want a single password (Supervisor), you may go to step 10 to exit the utility
and save changes.
9. If you want to enter a User password, use the arrow key to move to the
Change User
Password
menu selection and press the
Enter
key. Repeat Steps 4-7 for the User
password.
10. If you have finished setting or changing passwords, press the
Esc
key to exit this menu.
11. Use the right-arrow key to go to the
Exit
menu.
12. Select
Exit Saving Changes
from the list of exit options, and then press the
Enter
key.
A dialog box displays and asks you to confirm your decision.
13. Select
Yes
and then press the
Enter
key.
The HP server reboots and the password changes have been accepted. After the server
reboots, you will be required to use your new password to enter the Setup Utility or
complete the boot process. If you forget your password, refer to “Password Problems” in
Chapter 4, “Troubleshooting.”
14. To change one of the passwords at a later date, return to the
Security
menu and repeat
Steps 2 through 7 above for one or both passwords.
2-40
HP ProLiant ML150 Server Operations and Maintenance Guide
HP CONFIDENTIAL
Codename: Stone Soup Part Number: 343329-001 Last Saved On: 8/14/03 10:09 AM
