HP McDATA User Manual Download Page 72 | Manualshive

Page: 72 / 104

background image

72

Fabric Device Management Interface

Fabric Device Management Interface (FDMI) provides a means to gather and display device information
from the fabric, and allows FDMI capable devices to register certain information with the fabric, if FDMI is
enabled. McDATA Web Server or Element Manager will report any and all FDMI information reported by
the entry switch, if FDMI is enabled on the entry switch. To view FDMI data, FDMI must be enabled on the
entry switch and on all other switches in the fabric that are to report FDMI data.

FDMI is comprised of the fabric-to-device interface and the application-to-fabric interface. The
fabric-to-device interface enables a device’s management information to be registered. The
application-to-fabric interface provides the framework by which an application obtains device information
from the fabric. Use the

FDMI HBA Entry Limit

field on the Switch Properties dialog to configure the

maximum number of HBAs that can be registered with a switch. If the number of HBAs exceeds the
maximum number, the FDMI information for those HBAs can not be registered.

Use the

FDMI Enabled

option on the Switch Properties dialog to enable or disable FDMI. If FDMI is

enabled on an HBA, the HBA forwards information about itself to the switch when the HBA logs into the
switch. If FDMI is enabled on a switch, the switch stores the HBA information in its FDMI database.
Disabling FDMI on a switch clears the FDMI database. If you disable FDMI on a switch, then re-enable it,
you must reset the ports to cause the HBAs to log in again, and thus forward HBA information to the switch.

Click the

Devices

data window tab and click

(i)

in the Details column of the Devices data window to view

detailed FDMI information for a device. The Detailed Devices Display dialog displays the specific
information for that device. See ”

Devices data window

” on page 34 for more information.

Advanced switch properties

The Advanced Switch Properties dialog shown in

Figure 31

enables you to set the timeout values and

interop mode settings. The Advanced Switch Properties dialog is available for only the entry switch,
because an in-band switch can not be taken offline. The switch will automatically be taken offline
temporarily and will be restored to its original state after the changes are completed. Select

Switch >

Advanced Switch Properties

to open the Advanced Switch Properties dialog. Click

OK

after making any

changes to put the new values into effect. The default interop mode is Standard.

Figure 31

Advanced switch properties dialog

Use the Advanced Switch Properties dialog to change the following switch configuration parameters:

•

Timeout values

, page 73

•

Interop mode

, page 73

«
...
70
71
72
73
74
...
»

Summary of Contents for McDATA









































































































Reviews:

No comments

Related manuals for McDATA

Matrix-PRO HD-SDI

Brand: Barco Pages: 2

Brand: CAME Pages: 2

Brand: JB Systems Light Pages: 15

RackSwitch G8264T

Brand: IBM Pages: 20

Brand: Intermatic Pages: 1

Brand: Grozone Control Pages: 20

Brand: Cabletron Systems Pages: 170

MediaHub Mini TA-3350

Brand: TeleAdapt Pages: 23

Brand: Comet Labs Pages: 46

8 Port 10/100 Ethernet Switch

Brand: OnQ Technologies Pages: 14

ConferenceHub TA-6500

Brand: TeleAdapt Pages: 16

Brand: Angustos Pages: 15

Brand: A-Neuvideo Pages: 20

Brand: MaxTech Pages: 10

Brand: Kramer Pages: 27

Brand: SDMO Pages: 24

Brand: TRENDnet Pages: 6

IE-SW-EL10-8GTPoE-2GESFP

Brand: Weidmüller Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands