HP M8501, Installation And User Manual

Page: 5 / 88

Contents
M8501 and M8502 ACL Tape Drive Installation and User’s Guide — 529972-003
iii
Tables
Figure 1-3. Tape Cartridge Magazine 1-4
Figure 1-4. View of Barcode Reader and Shuttle Assembly 1-5
Figure 1-5. Front Panel Indicators 1-6
Figure 2-1. M8501 ACL Template 2-1
Figure 2-2. Installing the Slide Members 2-3
Figure 2-3. Installing Slide Member Fasteners 2-4
Figure 2-4. Tabletop Model Clearances 2-5
Figure 3-1. Hardware Configuration 3-2
Figure 3-2. Tape Drive’s Fibre Channel Port Connection 3-3
Figure 3-3. LC-LC Fiber Cable 3-4
Figure 3-4. View of Two FCSAs at the Rear of the Server 3-5
Figure 3-5. Powering On the ACL Tape Drive 3-6
Figure 3-6. Status Button 3-7
Figure 4-1. Front Panel 4-1
Figure 4-2. Magazine Door Mechanical Release 4-2
Figure 4-3. Initialization Screen 4-3
Figure 4-4. ACL Default Screen 4-4
Figure 4-5. Technical Support Information 4-5
Figure 4-6. Access Magazine Screen 4-6
Figure 4-7. Move Media Screen 4-6
Figure 4-8. Move Media Screen (Source) 4-7
Figure 4-9. Move Media Screen (Destination) 4-7
Figure 4-10. Power Down Initiation Screen 4-8
Figure 4-11. Menu Screen 4-10
Figure 4-12. View ACL Options Screen (Initial Screen) 4-11
Figure 4-13. Tape Magazine With Tape Cartridges Installed 4-14
Figure 4-14. Barcode Label Installation (LTO) 4-15
Figure 6-1. Troubleshooting Flow Chart 6-2
Figure A-1. Configuration Example A-2
Figure A-2. Front View of Tape Drive A-3
Figure A-3. LC-LC Fiber-Optic Cable A-4
Figure A-4. Rear Components of Tape Drive A-5
Figure A-5. View of Two FCSAs at Rear of Server A-6
Figure A-6. LC-SC Fiber-Optic Cable A-7
Figure A-7. Rear View of IOAM Enclosure A-8
Figure A-8. View of MSEB at Rear of Server A-9
Figure A-9. Status Button A-11
Tables