HP Kayak XU, User Manual

Page: 76 / 149

3 Troubleshooting Your PC Workstation
If Your PC Workstation Has a Hardware Problem
64 English
device priority list)
•
Write on flexible disk drives (select the Security menu and the
Hardware protection submenu and check that Write on Flexible
Disks is
Unlocked
).
•
Check that the disk power and data cables are correctly connected.
If the Hard Disk Does
Not Work
•
Check that the disk power and data cables are correctly connected
(refer to Connecting Devices on page 32).
•
Check that the hard disk drive has been
Unlocked
(in the Setup
program, select the Security menu and refer to the Hardware
Protection submenu). There is also an option in the
Setup program
that lets you enable or disable boot on the hard disk drive (refer to
the Boot Devices Security submenu of the Security menu and check
that Start from IDE HDD is
Enabled
).
•
Check that all hard disk drives have been detected (in the
SCSISelect™ utility, select SCSI Disk Utilities and check that each
hard disk drive is listed with a SCSI ID).
•
If you have installed an IDE hard disk and are using the integrated
IDE controller, check that the Local Bus IDE is enabled (in the
Setup
program, select the Advanced menu, the IDE Devices submenu, and
check that Local Bus IDE adapter is
Primary
).
If you have installed the Adaptec
®
RAID port adapter:
•
In the SCSISelect utility, check that each disk drive has a unique
SCSI ID.
•
Run the Array Config™ utility to check the array configuration.
•
Use the Array Config utility (and not HP Setup ) to check that the
array has been selected as the boot device.
For further details and troubleshooting advice, refer to “The HP
FastRAID Option” on page 84.
If the Hard Disk Activity
Light Does Not Work
If the hard disk activity light does not flicker when the PC Workstation
is accessing the hard disk drive:
•
Check that the control panel connector is firmly attached to the
system board.
•
Check that the disk power and data cables are correctly connected.
napa.bk : napa-ug3.fb4 Page 64 Monday, August 4, 1997 7:20 PM