HP Kayak XU User Manual Download

Page: 56 / 149

2 How to Install Accessories Inside Your PC Workstation

Installing Mass Storage Devices

English

Remove the plastic panel from the cover by pulling the panel from
the left and unhinging its right-hand side. Store the panel in a safe
place.

Install any other accessories before replacing the cover and
completing the installation.

Completing the Installation of a Drive

When an IDE CD-ROM
Drive Is Installed

Switch on the computer and press

when

Setup

appears.

In the

Setup

program, select the Advanced menu, the IDE Devices

submenu. Check that the CD-ROM drive has been detected on the
IDE channel.

Press

to save and exit the program.

When a Flexible Disk
Drive Is Installed

Switch on the computer and press

when

Setup

appears.

In the

Setup

program, select the Advanced menu, the Flexible Disk

Drives submenu, and check that the drive has been detected.

Press

to save and exit the program.

Unclip and lift out
the plastic panel

napa.bk : napa-ug2.fb4 Page 44 Monday, August 4, 1997 7:20 PM

Summary of Contents for Kayak XU






















































































































































Search results

Summary of Contents for Kayak XU

Reviews:

Related manuals for Kayak XU

Brands by name

Popular brands

HP Kayak XU, User Manual

Search results

Summary of Contents for Kayak XU

Reviews:

Related manuals for Kayak XU

Brands by name

Popular brands