2
Site preparation requirements for the printer
Physical space requirements
Unloading route
The printer is commonly delivered by truck. The reception area and the entrance to the site should be
unobstructed and ready to receive delivery.
The route between the unloading area of the printer and the installation site, including any corridors and
doorways through which the printer must be transported, is important to proper site preparation and must be
planned before the arrival of the printer. This pathway must be clear when the printer arrives.
Printer physical specifications with packaging
Width with packaging
2300 mm (90.55 in)
Depth with packaging
1325 mm (52.17 in)
Height with packaging
2068 mm (81.42 in)
Weight with packaging
945 kg (2083 lb)
For the specifications without packaging, see
.
Doorway specifications
Minimum doorway width
2320 mm (91.34 in) with packaging
1202 mm (47.32 in) without packaging
Minimum doorway height
2088 mm (82.20 in) with packaging
1435 mm (56.50 in) without packaging
Minimum corridor width with right-angled bend
1520 mm (59.84 in) without packaging
The printer can be moved on the pallet up or down a ramp of no more than 10° inclination.
Unpacking and moving the printer
You are strongly recommended to unpack the printer where it will be used, or as close to that location as
possible.
8
Chapter 2 Site preparation requirements for the printer
ENWW
