background image

ii

7. (Optional) Connect a Console to the RSVLC-0501  . . . . . . . . . . . . .  2-13

Terminal Configuration  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-13
Direct Console Access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-14

Sample Network Topologies

   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-16

Ad Hoc Wireless LAN (no access point)   . . . . . . . . . . . . . . . . . . . . . . .  2-16

Infrastructure Wireless LAN   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-17

Infrastructure Wireless LAN for Roaming Wireless PCs  . . . . . . . . . .  2-18

3 Getting Started With Access Point Configuration

Recommended Minimal Configuration . . . . . . . . . . . . . . . . . . . . . . . . . .  3-1

Using the Command Line Interface   . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-2

To Set the Manager User Name and Password   . . . . . . . . . . . . . . .  3-2
To Set the Access Point’s IP Address   . . . . . . . . . . . . . . . . . . . . . . .  3-3
To Set the Access Point’s Country Code . . . . . . . . . . . . . . . . . . . . .  3-4
To Configure Radio Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-4

Where to Go From Here  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-7

Using the IP Address for Remote Access Point Management

  . . . . .  3-8

Starting a Telnet Session   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-8

Starting an SSH Session  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-9

Starting a Web Browser Session  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-9

4 Using an External Antenna with the RSVLC-0501

External Antenna Options

  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-2

Installation Procedures

 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-3

1. Plan the Installation   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-3

2. Mount the Antenna  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-4

3. Connect Pigtail Cables to the Access Point  . . . . . . . . . . . . . . . . . . . .  4-4

4. Configure the Antenna Mode and Type  . . . . . . . . . . . . . . . . . . . . . . .  4-6

Setting the Antenna Mode and Type Using the CLI  . . . . . . . . . . . .  4-6
Setting the Antenna Mode and Type Using the Web Interface . . .  4-6

Summary of Contents for J8986A


























Reviews: