HP J3188A, Installation And Reference Manual

Page: 47 / 100

3-17
Managing the Hub
Console Command Reference
M
ana
gi
ng
t
h
e
Hu
b
pair ports; that is, the security parameters will all be set to NO (configured
address selection methods, and learned or assigned addresses are not
changed).
If you select
assign Each port (
E
)
, a table like the following is displayed:
For each port, enter an address selection method ( F , or C ), or a specific
MAC address, or press
[Enter]
to retain the current value. Continue this
process until all of the ports are displayed. If you do not want to configure
all twisted-pair ports, note that you can terminate the address selection
method by pressing
[Enter]
once. In either case, you are then prompted for
the settings for the Send Alarm and Eavesdrop Prevention parameters, as
described on the next page.
Port
ADDRESS
SELECTION
METHOD
AUTHORIZED
ADDRESS F, C, or
a MAC address
1
2
3 CONTINUOUS
CONTINUOUS
CONTINUOUS NONE
NONE
NONE
MUCHO.BK : ch3.fm5 Page 17 Thursday, June 26, 1997 11:37 AM