manualshive.com logo in svg

HP J282, Owner'S Manual, Page: 266 / 278

Share
Download
HP J282 Owner'S Manual Download Page 266

GL-18

pointer

Sometimes called the “mouse pointer,” the pointer shows the mouse
location on the screen. The pointer’s shape depends on its location. In
the HP VUE Workspace, the pointer is an X. On a window frame, the
pointer is an arrow.

process

A computing environment in which you may execute programs; a
program currently running in the system.

process ID

A unique identification number assigned to all processes by the oper-
ating system. Also referred to as a PID. See also PID.

program

A unit of executable code, in binary or “source” form. Most HP–UX
commands and routines consist of programs.

prompt

A message or symbol displayed by the system to let you know that it
is ready for your input.

push button

A graphic control that simulates a real–life push button. Use the
pointer and mouse to push the button and immediately start an action.

RAM

Random access memory.

Summary of Contents for J282























































































































































































































































































Reviews:

No comments