Chapter 4
Procedures
22
Repackaging the Rack for Shipment
Use the original packing material to repackage the empty rack for shipment. If the packing
material is not available, contact your local Hewlett-Packard Sales and Support office.
Before shipment, securely place a tag on the container (and equipment) to identify the owner and
the service to be performed. Include the rack model number.
To repackage the rack, follow the repackage checklist below, and refer to the unpacking
instructions for details.
1.
Assemble the original HP packing materials, or contact your local Hewlett-Packard
Sales and Support office.
2.
Connect the loading ramp to the pallet.
3.
Raise the leveling feet.
4.
Push the rack up the ramp, front first.
5.
Secure the rack to the pallet.
6.
Place the anti-static bag over the rack.
7.
Place the top pad packing material and loading/unloading ramps on the sides of the
rack.
8.
Place the corrugated wrap around the rack.
9.
Put the box top on the box.
10.
Secure the top to the pallet with top-to-bottom plastic bands.
Installation of Standard Rack Accessories
This section provides installation procedures for the HP Rack System/E accessories.
