7–6
User’s Guide
Using Wi-Fi
2. On the iPAQ Wireless screen, tap the
Wi-Fi
button to turn it
on, then tap the
Settings
button next to it.
3. Tap the
Wireless
tab >
Add New Settings.
4. Tap the
General
tab and enter a network name (SSID).
NOTE:
If a network was detected in step 2, the SSID is
automatically entered and cannot be changed.
5. In the
Connects to:
box, select where your network connects
to
(The Internet
or
Work).
6. If you want to connect to an ad-hoc connection, tap the
This
is a device-to-computer (ad-hoc) connection
checkbox.
7. If authentication information is needed, from the Settings
screen, tap
Configure Wireless Networks.
NOTE:
To determine whether authentication information is
needed, see your network administrator.
8. In the box next to
Authentication:
, tap the arrow for the
drop-down list, and select the type of network authentication
to use.
a.
In the box next to
Data Encryption,
tap the arrow for the
drop-down list, and select the type of Data encryption
(WEP enabled)
to use.
b.
If a network key is provided by your network
automatically, check the
The Key is provided for
me automatically
checkbox.
c.
To use Shared Key authentication, type the network key
in the
Network Key:
box.
d. For increased security, check the
Enable network
access using IEEE 802.1X
checkbox. You should
only check this option if it is supported by your network
environment. Ask your network administrator if you are
unsure.
