HP iPAQ h5450 Reference Manual Download Page 41

Page: 41 / 258

2–12

Reference Guide

Getting Acquainted

To set the time for home:

1. From the

Start

menu, tap

Settings.

2. Tap

System,

then

Clock.

✎

By default, the time on the host computer is synchronized with
the iPAQ Pocket PC each time the 2 devices connect using
ActiveSync.

3. Verify

Home

is selected or tap

Home.

4. Tap the time-zone down arrow, then select your home

time zone.

5. Tap the hour, minutes, or seconds, then use the up and down

arrows to adjust the time.

✎

You can adjust the time by moving the hands of the clock with
the stylus.

6. Tap

PM.

7. Tap

OK.

8. Tap

Yes

to save the clock settings.

281984-001.book Page 12 Thursday, September 26, 2002 5:05 PM

Summary of Contents for iPAQ h5450



































































































































































































































































Search results

Summary of Contents for iPAQ h5450

Reviews:

Related manuals for iPAQ h5450

Brands by name

Popular brands

HP iPAQ h5450, Reference Manual

Search results

Summary of Contents for iPAQ h5450

Reviews:

Related manuals for iPAQ h5450

Brands by name

Popular brands