HP invent mp31300W User Manual Download Page 51

Page: 51 / 84

User’s Guide

Maintaining the Projector

Upgrading the Projector

To update the firmware

HP might periodically release updated versions of the projector firmware to enhance
the projector performance. The projector firmware version is shown in the on-screen
menu at

Help > About this projector.

Check for updated versions at

http://www.hp.com/go/proj_firmware.

USB method

1. On a computer with a VGA port and USB port, go to the HP projector upgrade

website (see introduction for this section) and download the latest file intended for
a USB upgrade.

2. Connect the M1-to-VGA/USB cable between the M1 port on the projector and the

VGA port on the computer.

3. Connect the USB plug of the M1-to-VGA/USB cable into the USB port on the

computer. This connection is required.

4. On the computer, run the file you downloaded by double-clicking the file. Follow

the on-screen instructions. Do not turn off the projector until you are prompted.

Summary of Contents for invent mp31300W





















































































Search results

Summary of Contents for invent mp31300W

Reviews:

Related manuals for invent mp31300W

Brands by name

Popular brands

HP invent mp31300W, User Manual

Search results

Summary of Contents for invent mp31300W

Reviews:

Related manuals for invent mp31300W

Brands by name

Popular brands