HP invent mp31300W User Manual Download

Page: 34 / 84

User’s Guide

Giving Presentations

To change the source

To change the source, either:

■

Press the

source

button on the projector or remote control.

■

Open the on-screen menu, select

Input,

and select the port to which the input

source is connected.

To hide or show the display

You can hide the display from your audience temporarily.

■

Press the

hide

button on the remote control.

■

Open the on-screen menu and select

Quick choice > Hide.

The screen remains blank until you press the

hide

button again or any other button on

the projector or remote control.

✎

If you are using Microsoft

PowerPoint, you can also press the

key or the

key to

hide the display. The screen remains blank until you press the

key or the

key

again.

Summary of Contents for invent mp31300W





















































































Search results

Summary of Contents for invent mp31300W

Reviews:

Related manuals for invent mp31300W

Brands by name

Popular brands

HP invent mp31300W, User Manual

Search results

Summary of Contents for invent mp31300W

Reviews:

Related manuals for invent mp31300W

Brands by name

Popular brands