7
•
If a string you entered partially matches a keyword and an alias, the command indicated by the
alias is executed. To execute the command indicated by the keyword, enter the complete keyword.
•
If a string you entered exactly matches a keyword and partially matches an alias, the command
indicated by the keyword is executed. To execute the command indicated by the alias, enter the
complete alias.
•
If you enter a string that partially matches multiple aliases, the system displays a prompt.
•
If you press
Tab
after you input the keyword of an alias, the original format of the keyword is
displayed.
Configuration procedure
Follow these steps to configure command aliases:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enable the command alias function
command-alias enable
Required
Disabled by default, which means
you cannot configure command
aliases.
Configure a command alias
command-alias mapping
cmdkey
alias
Required
Not configured by default.
Configuring CLI hotkeys
Follow these steps to configure CLI hotkeys:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Configure CLI hotkeys
hotkey
{
CTRL_G
|
CTRL_L
|
CTRL_O
|
CTRL_T
|
CTRL_U
}
command
Optional
The
Ctrl+G
,
Ctrl+L
and
Ctrl+O
hotkeys are specified at the CLI by
default.
Display hotkeys
display hotkey
Available in any view. See
for hotkeys reserved by the system.
NOTE:
By default, the
Ctrl+G
,
Ctrl+L
and
Ctrl+O
hotkeys are associated with pre-defined commands and the
Ctrl+T
and
Ctrl+U
hotkeys are not.
•
Ctrl+G
corresponds to the
display current-configuration
command.
•
Ctrl+L
corresponds to the
display ip routing-table
command.
•
Ctrl+O
corresponds to the
undo debugging all
command.
Table 3
Hotkeys reserved by the system
Hotkey Function
Ctrl+A
Moves the cursor to the beginning of the current line.
Ctrl+B
Moves the cursor one character to the left.
