HP 2610-48 Switch
(J9088A)*
Ports
48 autosensing 10/100 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type
100BASE-TX); Media Type: Auto-MDIX; Duplex: half or full
1 RJ-45 serial console port
2 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u
Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-
T/100BASE-TX: half or full; 1000BASE-T: full only
2 open mini-GBIC (SFP) slots
Physical characteristics
Dimensions
9.3(d) x 17.4(w) x 1.73(h) in. (23.62 x 44.2 x 4.39
cm) (1U height)
Weight
10.75 lb. (4.88 kg), Fully loaded
Memory and processor
Processor
MIPS @ 300 MHz, 16 MB flash, 128 MB SDRAM;
packet buffer size: 2 MB
Mounting
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware
included); horizontal surface mounting only
Performance
100 Mb Latency
< 6.2 µs (LIFO)
1000 Mb Latency
< 4.4 µs (LIFO)
Throughput
up to 13.0 million pps
Routing/Switching
capacity
17.6 Gbps
Routing table size
8000 entries
Environment
Operating temperature
32°F to 122°F (0°C to 50°C)
Operating relative
humidity
15% to 95% @ 104°F (40°C), noncondensing
Nonoperating/Storage
temperature
-40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage
relative humidity
15% to 90% @ 149°F (65°C), noncondensing
Altitude
up to 10,000 ft. (3 km)
Acoustic
Power: 45 dB, Pressure: 36.2 dB; DIN 45635T.19
per ISO 7779
Electrical characteristics
Achieved Miercom Certified Green Award
* Products within this series have achieved sufficient scores in each of the
rated criteria to achieve the Miercom Certified Green distinction Award. See
the Specifications section of this series for more information.
Maximum heat
dissipation
285 BTU/hr (300.67 kJ/hr)
Voltage
100-127/200-240 VAC
Current
1.3/0.8 A
Maximum power rating
66 W
Frequency
50/60 Hz
QuickSpecs
HP 2610 Switch Series
Technical Specifications
DA - 13032 Worldwide — Version 18 — November 11, 2013
Page 9
