2 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u
Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-
T/100BASE-TX: half or full; 1000BASE-T: full only
2 open mini-GBIC (SFP) slots
Physical characteristics
Dimensions
12.5(d) x 17.4(w) x 1.73(h) in. (31.75 x 44.2 x 4.39
cm) (1U height)
Weight
15.05 lb. (6.83 kg), Fully loaded
Memory and processor
Processor
MIPS @ 300 MHz, 16 MB flash, 128 MB SDRAM;
packet buffer size: 1 MB
Mounting
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware
included); horizontal surface mounting only
Performance
100 Mb Latency
< 4.1 µs (LIFO)
1000 Mb Latency
< 2.9 µs (LIFO)
Throughput
up to 9.5 million pps
Routing/Switching
capacity
12.8 Gbps
Routing table size
8000 entries
Environment
Operating temperature
32°F to 122°F (0°C to 50°C)
Operating relative
humidity
15% to 95% @ 104°F (40°C), noncondensing
Nonoperating/Storage
temperature
-40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage
relative humidity
15% to 90% @ 149°F (65°C), noncondensing
Altitude
up to 10,000 ft. (3 km)
Acoustic
Power: 64 dB, Pressure: 57 dB; DIN 45635T.19 per
ISO 7779
Electrical characteristics Maximum heat
dissipation
410 BTU/hr (432.55 kJ/hr), (switch-only BTU/hr:
410; combined max. PoE devices at 15.4
W: 2281 BTU/hr)
Voltage
100-127/200-240 VAC
Current
7.0/3.5 A
Maximum power rating
77 W
PoE power
406 W
Frequency
50/60 Hz
Notes
Maximum power rating and maximum heat
dissipation are the worst-case theoretical
maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped),
100% traffic, all ports plugged in, and all modules
populated.
PoE Power is the power supplied by the internal
power supply, it is dependent on the type and
quantity of power supplies and may be
QuickSpecs
HP 2610 Switch Series
Technical Specifications
DA - 13032 Worldwide — Version 18 — November 11, 2013
Page 14
