HP FTAM/9000 Reference Manual Download Page 86

Page: 86 / 102

Chapter 4

Event Management Errors

EM vendor_codes

This section contains a list of values that may be returned in the result-
>vendor_code field when calling em_wait(), em_fdmemory(), and
em_gperror().

result->return_code

MESSAGE

EMV000_NO_CODE_SUPPLIED

CAUSE

No additional vendor-specific information is available;
the return_code provides sufficient information.

ACTION

Informative message; no action required.

MESSAGE

EMV002_PARAM_EVENT_NAME

CAUSE

The return_event_name buffer pointer is set to NULL.

ACTION

Set the return_event_name parameter to a valid,
non-NULL value.

MESSAGE

EMV003_PARAM_IN_RESULT

CAUSE

The input_result buffer pointer is set to NULL.

ACTION

Set the input_result parameter to a valid, non-NULL
value.

MESSAGE

EMV004_PARAM_RET_STRING

CAUSE

The return_string buffer pointer is set to NULL.

ACTION

Set the return_string parameter to a valid, non-NULL
value.

Summary of Contents for FTAM/9000






































































































Search results

Summary of Contents for FTAM/9000

Reviews:

Related manuals for FTAM/9000

Brands by name

Popular brands

HP FTAM/9000, Reference Manual

Search results

Summary of Contents for FTAM/9000

Reviews:

Related manuals for FTAM/9000

Brands by name

Popular brands